Reel Accessories

Roller Hose Guide Assemblies

These four-way roller guide assemblies are for use with reels on cabinet door openings and for similar locations where sharp edges may cut or damage the hose. The four-way design permits pulling or retracting hose at any angle. Model S270109 has nylon rollers mounted on an 11 gauge steel frame with pre-drilled mounting holes.

Note: A hose bumper should be used with the four-way roller hose guide assemblies to prevent damage to rollers and nozzles.

Drag your finger across the table to scroll

Model Accomodates Weight Dimensions
Hose I.D. A B C D E F
in (mm) lb kg in mm in mm in mm in mm in mm in mm
HR1057 0.603 (16) - .906 (23) 0.25 0.12 0.875 22.3 N/A 3.125 79.4 3.125 79.4 1.6875 42.9 1.6875 42.9
HR1059 0.250 (6.4) - .625 (15.9) 0.25 0.12 0.625 15.9 N/A 3.125 79.4 3.125 79.4 1.6875 42.9 1.6875 42.9
HR1145 0.603 (16) - .906 (23) 0.34 0.15 2 50.8 1 25.4 3.75 95.3 2.75 69.9 2.125 54.1 3.125 79.4
S270109 0.900 (23) - 2.00 (50.8) 5.39 2.44 5.25 133.4 2.375 60.4 12 305 8 204 5 127 10.5 267
600168 0.900 (23) - 1.38 (35) 1.75 0.34 1.75 44.5 2.0625 27 5.125 130 5.125 130 4 102 4 102

Dimensions for Hose Guide Assemblies from Reelcraft

Roller Guide Assemblies

Spools and blocks are chrome-plated to resist corrosion and abrasion. Rollers speed handling and reduce wear on hose. All painted parts are finished with durable abrasion resistant baked-on powder coat. Delrin bearing surfaces give a quiet operation with minimum wear and all features combine to give trouble-free maximum service life.

3 way roller assemblies from Reelcraft

3-Way Roller Assemblies

3 way roller assemblies from Reelcraft

4-Way Roller Assemblies

3 way roller assemblies from Reelcraft

Special UHMW Composite Rollers Assemblies

For the special UHMW composite rollers, add a "U" at the end of the part number. (Example: S600693-1U)


Drag your finger across the table to scroll

Hose Reel Spool Size Bottom Wind Top Wind Multi Position
in mm Roller bracket assembly model number Roller bracket assembly model number Roller bracket assembly in mm model number
Multi Position Roller bracket assembly in mm model number
6 152 S600693-1 S600692-1 S600533-1
12 305 S600693-2 S600692-2 S600533-2
18 457 S600693-3 S600692-3 S600533-3
22 559 S600693-4 S600692-4 S600533-4
28 711 S600693-5 S600692-5 S600533-5
Series 30000 - Three Way Rollers
6 152 S602132-1 S602133-1  
12 305 S602132-2 S602133-2
18 457 S602132-3 S602133-3
22 559 S602132-4 S602133-4
28 711 S602132-5 S602133-5
Bottom wind and top wind may be used with all models except bevel crank. Multi position may not be used on models with a chain guard or Series 37000 reels.

Additional Accessories

Drag your finger across the table to scroll

340 degree Pivot Base from Thern 340° Pivot Base
Aligns reel to the direction of hose or cord run. May be mounted with reel upright or hanging. Weight 10 lbs (5 kg). Note: Use if hoses or cords are pulled at more than 45°.
Part # Compatible Reel
600608 RT / 4000 / 5000 / 5005 / 7000
600801 80000 / D80000 / 30006
600801-12 30012
Wall Mounted Universal Swing Brackets from Reelcraft Wall-Mounted Universal Swing Bracket
Bracket will pivot approximately 180°. All steel construction with a durable baked on powder coat finish. Weight 6 lbs (3 kg).
Note: Use if hoses or cords are pulled at more than 45°.
Note: Not for overhead mounting.
Part # Compatible Reel
600992 RT
600993 4000 / 5000
600626 RT / 4000 / 5000 / 5005 / 7000
600980 80000 / D80000 / DP5000 / DP7000
Top Mounting Channels and Beam Clamps and Adaptor Assembly Top Mounting Channels and Beam Clamps
For mounting Series 7000 reels to an I-beam or overhead support. Mounting channels can be mounted end to end to mount three or more reels. To permit the mounting of Reelcraft Series RT, 4000, 5000, 5005 and electric cord reels on mounting channel, an adaptor assembly must be used (#600230).
Part # Description
600370 Top channel and beam clamps - for one reel
600295 Top channel and beam clamps - for two reels
600230 Adaptor Assembly
Used with top channels and beam clamps only

Drag your finger across the table to scroll

Part Number Specifications Use with Motor  
Push Button Switch
S600870 115/230 V AC, 10 AMP fuse S260430 S600870 Operating Switches from Reelcraft
600811 12/24 V DC, up to 1/3 HP, breaker and relay S260409, 260450 600811 Operating Switches from Reelcraft
S600808 600811 switch with bracket, 12/24 V DC S260409, 260450 S600808 Operating Switches from Reelcraft
600869 12/24 V DC, up to 2/3 HP S260583, S260626 600869 Operating Switches from Reelcraft
260424 Momentary contact with rubber cap, 12/24 V DC, non-explosion proof Any DC motor 260424 Operating Switches from Reelcraft
260425 Momentary contact, class 1 group D, for 115/230 V AC rewind motor. May also be used with solenoid for 12 or 24 V DC. Any explo- sion proof motor 260425 Operating Switches from Reelcraft
Speed Control Switch
600871 115/230 V AC, 10 AMP S260430 600871 Operating Switches from Reelcraft
600866 12/24 V DC S260409, S260583, 260450, S260626 600866 Operating Switches from Reelcraft
Push Button Switch with Speed Control
S600872 115/230 V AC, 10 AMP fuse, adjustable speed control S260430 S600872 Operating Switches from Reelcraft
600873 115/230 V AC, 10 AMP fuse, forward/reverse adjustable speed control   600873 Operating Switches from Reelcraft
600867 DC, 25 AMP, up to 1/3 HP S260409 600867 Operating Switches from Reelcraft
600868 DC, 40 AMP circuit breaker, up to 2/3 HP S260583 600868 Operating Switches from Reelcraft

Switch Accessories

Drag your finger across the table to scroll

Part Number Secifications Description
Circuit Breaker
S260422 40 AMP. Use with DC electric rewind motors. Manual reset button must be pressed firmly to reset. S260422 Switch Accessories from Reelcraft
Starting Solenoid
S260426 12 V DC for activation of motor. S260426 Switch Accessories from Reelcraft
Mounting Bracket
260532 Combination for circuit breaker, solenoid and starting switch. 260532 Switch Accessories from Reelcraft
Junction Box
370200 For explosion proof motor. S260422 Switch Accessories from Reelcraft

Rewind Motors

Reels are equipped with electric or compressed air motors to drive chain and sprocket rewind mechanisms.

Drag your finger across the table to scroll

Part Number Specification  
Electric Motors
S260409 Reversible type, 12 V DC 1/3 HP S260409 Rewind Motors from Reelcraft
260450 Reversible type, 24 V DC 1/4 HP
Explosion Proof Electric Motors
S260430 Reversible type, single phase, explosion proof, Class 1 Group D Division 1, 115 V AC 0.40 HP. An explosion proof, Class I Group D junction box is available for wiring A.C. motors - #370200  
S260626 24 V DC 2/3 HP. Electric motor reversible type. Explosion proof.  
S260583 12 V DC 2/3 HP. Electric motor reversible type. Explosion proof. S260583 Rewind Motors from Reelcraft
Hydraulic Motor
370066 1021 RPM, 668 lb-in, 2400 psi, 2.2 in³ intermittent 1800 psi continuous. 370066 Rewind Motors from Reelcraft
Air Motors
260428 4 AM delivers up to 11/2 HP, 1/4" NPTF (F) inlet. 260428 Rewind Motors from Reelcraft
260429 6 AM delivers up to 4 HP, 1/2" NPTF (F) inlet. 260429 Rewind Motors from Reelcraft

Additional Accessories

Drag your finger across the table to scroll

Part Number Specification  
Chain Shrouds
S600518 Optional chain shroud for Series 30000 and Series 1200 reels. S261746 Chain Shrouds from Reelcraft
S261746 Optional chain shroud for Series 2400, 3700 and 3900 reels.
Control Valves
260454 Pneumatic on/off flow control valve assembly, 1/4" NPTF (F) inlet and outlet to be used with 4 AM compressed air motors. We also recommend using a filter, regulator, and lubricator with compressed air motors. 260454 Control Valves from Reelcraft
260455 Same as above with 3/8" NPTF (F) inlet and outlet, to be used with 6 AM motors. 260455 Control Valves from Reelcraft

Adjustable Hose Bumpers

Adjustable hose bumpers are solid molded rubber assuring a long life and nonslip grip. Hose bumpers allow the desired length of hose to be permanently stored outside the reel. Hose bumpers are included on the reels purchased with hose. Reels purchased without hose do not include the hose bumper. When ordering, advise the part number, reel model and the hose I.D. and O.D.
NOTE: To order hose bumper with stainless steel hardware, change part number prefix from HR to HS.

Adjustable Hose Bumpers from Reelcraft
Dimensions for Adjustable Hose Bumpers from Reelcraft

Drag your finger across the table to scroll

For Reel Series Part Number Hose O.D. (dia A) Hose I.D. Dia. B-C-E Dia. D Weight
in (mm) in mm in mm in mm lb kg
4000 / 5000 / RT400 / 3100 6000 / L4500 / L5000 / DP 1-HR1004-A 0.438 (11) - .625 (16) 1/4 6 2 1/2 64 1 1/4 32 0.24 0.10
4000 / 5000 / D8000 / RT400 RT600 / 6000 1-HR1004 0.625 (16) - .749 (19) 3/8 10 2 1/2 64 1 1/4 32 0.25 0.11
7000 / 80000 / E8000 / 3100 RT800 / 5000 / D80000 / DP 1-HR1004-3 0.625 (16) - .749 (19) 3/8 10 3 73 1 1/4 32 0.24 0.10
5000 / A5005 / 7000 / 80000 D8000 / E8000 / RT800 / DP 2-HR1004-3 0.750 (19) - 1.05 (27) 1/2 or 3/8 13 or 10 3 73 1 1/4 32 0.23 0.10
7000 / 8000 / D8000 / 80000 GC7000 / F7000 / F80000 / L7000 / DGM 3-HR1004-3 1.06 (27) - 1.38 (35) 3/4 19 3 73 1 1/4 32 0.32 14
TW5000 / TW7000 / 3100T TW80000 /TWD80000 8-HR1004-3 0.530 (13) twin 1/4 twin 6 3 73 1 1/4 32 0.24 0.10
TH80000 / TW80000 / 3100T TH7000 / TW8000 600521 0.680 (17) twin 3/8 twin 10 3 1/2 89 2 51 0.45 0.20
3100T / 4800T / TH80000 600522 0.810 (21) twin 1/2 twin 13 3 1/2 89 2 51 0.49 0.22
D9000 / E9000 / 3100 / 4800 2-HR1005 0.750 (19) - 1.05 (27) 1/2 13 31/2 89 27/8 73 0.95 0.43
D9000 / E9000 / FE9000 / 3100 / 4800 / SD 3-HR1005 1.06 (27) - 1.38 (35) 3/4 19 3 1/2 89 2 7/8 73 0.95 0.43
D80000 / D8000 / D9000 / E9000 / FD9000 / FE9000 / 3100 / 4800 / SD 4-HR1005 1.39 (35) - 1.55 (39) 1 25 3 1/2 89 2 7/8 73 0.81 0.36
FE9500 / FF9500 / 4800 S600547-1 1.55 (39) - 1.75 (44) 1 1/4 32 3 3/4 95 2 7/8 73 0.70 0.31
FE9600 / FF9600 / 4800 S600547-2 1.75 (44) - 2.03 (52) 11/2 38 3 3/4 95 2 7/8 73 0.57 0.25

Inlet Hose Assemblies

Drag your finger across the table to scroll

Compatible Reel Hose I.D. Hose O.D. Length End Fittings Pressure Weight
in mm in mm ft m in psi bar lb kg
Low Pressure Air and water - PVC nylon braid
S601024-2 3/8 10 0.600 15 2 0.61 3/8 x 3/8 NPTF(M) 300 21 0.54 0.24
S601020-2 1/2 13 0.750 19 2 0.61 1/2 x 1/2 NPTF(M) 300 21 0.70 0.32
S601026-2 3/4 19 1.075 27 2 0.61 3/4 x 3/4 NPTF(M) 250 17 1.50 0.68
S601034-3 3/4 19 1.075 27 3 0.91 3/4 x 3/4 NPTF(M) 250 17 1.72 0.78
S601026-7 3/4 19 1.075 27 7 2.13 3/4 x 3/4 NPTF(M) 250 17 3.00 1.36
S601027-2 1 27 1.375 35 2 0.61 3/4 x 1 NPTF(M) 250 17 1.72 0.78
S601027-5 1 27 1.375 35 5 1.52 1 x 1 NPTF(M) 250 17 3.25 1.47
Medium Pressure Oil and petroleum fluids - 100 R1T one wire braid
S32-260043 3/8 10 0.710 18 2 0.61 3/8 x 3/8 NPTF(M) 2250 155 1.00 0.45
S17-260043 1/2 13 0.850 22 2 0.61 1/2 x 1/2 NPTF(M) 2000 138 0.91 0.41
S39-260043 1/2 13 0.850 22 5 1.52 1/2 x 1/2 NPTF(M) 2000 138 2.00 0.91
High Pressure Chassis grease - 100 R2T two wire braid
S17-260044 1/4 6 0.580 15 2 0.61 1/4 x 1/4 NPTF(M) 5000 345 0.75 0.34
S14-260044 3/8 10 0.730 19 2 0.61 3/8 x 1/2 NPTF(M) 4000 276 0.83 0.38

Replacement Hose Assemblies

Drag your finger across the table to scroll

Part Number I.D. O.D. Length Pressure End Fittings Weight
in in ft psi in - NPTF(M) lb
Low Pressure Air/water - PVC nylon braid. Max temp 150 °F (65 °C)
S601001-20 1/4 0.475 20 300 1/4 x 1/4 2.60
S601001-25 1/4 0.475 25 300 1/4 x 1/4 3.00
S601001-35 1/4 0.475 35 300 1/4 x 1/4 3.20
S601001-50 1/4 0.475 50 300 1/4 x 1/4 5.00
S601013-15 3/8 0.600 15 300 1/4 x 1/4 3.10
S601013-25 3/8 0.600 25 300 1/4 x 1/4 4.50
S601013-35 3/8 0.600 35 300 1/4 x 1/4 4.70
S601013-50 3/8 0.600 50 300 1/4 x 1/4 6.00
S601013-100 3/8 0.600 100 300 1/4 x 1/4 11.00
S601014-40 3/8 0.600 40 300 1/4 x 1/2 6.00
S601017-50 3/8 0.600 50 300 1/4 x 1/2 6.00
S601017-70 3/8 0.600 70 300 1/4 x 1/2 7.90
S601014-100 3/8 0.600 100 300 1/4 x 1/2 15.00
S601015-15 3/8 0.600 15 300 3/8 x 1/2 3.00
S601015-50 3/8 0.600 50 300 3/8 x 1/2 6.50
S601015-75 3/8 0.600 75 300 3/8 x 1/2 8.00
S601015-100 3/8 0.600 100 300 3/8 x 1/2 14.00
S601021-30 1/2 0.750 30 300 3/8 x 1/2 6.30
S601021-35 1/2 0.750 35 300 3/8 x 1/2 7.40
S601021-50 1/2 0.750 50 300 3/8 x 1/2 10.50
S601022-35 1/2 0.750 35 300 1/2 x 1/2 6.50
S601022-50 1/2 0.750 50 300 1/2 x 1/2 10.50
S601035-75 1/2 0.750 75 300 1/2 x 1/2 13.70
S601022-100 1/2 0.750 100 300 1/2 x 1/2 18.00
S601026-20 3/4 1.075 20 250 3/4 x 3/4 5.90
S601026-25 3/4 1.075 25 250 3/4 x 3/4 7.70
S601026-30 3/4 1.075 30 250 3/4 x 3/4 9.00
S601026-40 3/4 1.075 40 250 3/4 x 3/4 12.00
S601026-50 3/4 1.075 50 250 3/4 x 3/4 15.00
S601026-75 3/4 1.075 75 250 3/4 x 3/4 18.75
S601026-100 3/4 1.075 100 250 3/4 x 3/4 22.60
S601026-150 3/4 1.075 150 250 3/4 x 3/4 37.00
S601026-200 3/4 1.075 200 250 3/4 x 3/4 58.00
S601027-30 1 1.375 30 250 3/4 x 1 13.50
S601027-40 1 1.375 40 250 3/4 x 1 17.70
S601027-45 1 1.375 45 250 3/4 x 1 20.00
S601027-50 1 1.375 50 250 3/4 x 1 21.80
Low Pressure Fuel - 4 spiral poly yarn braid
S600160-1 3/4 1.188 25   3/4 x 3/4 17.50
S600160-4 3/4 1.188 35   3/4 x 3/4 24.50
S600160-2 3/4 1.188 50   3/4 x 3/4 35.00
S600160-3 3/4 1.188 75   3/4 x 3/4 52.50
S600451-2 1 1.500 2   1 x 1 1.70
S600451-35 1 1.500 35   1 x 1 30.00
S600451-50 1 1.500 50   1 x 1 42.00
Medium Pressure Oil/petroleum fluids - 100 R1T one wire braid. Max temp 210 °F (99 °C)
S43-260043 1/4 0.530 50 2750 1/4 x 1/4 7.90
S13-260043 1/4 0.530 20 2750 1/4 x 3/8 3.20
S14-260043 1/4 0.530 25 2750 1/4 x 3/8 4.00
S20-260043 1/4 0.530 30 2750 1/4 x 3/8 4.70
S33-260043 1/4 0.530 35 2750 1/4 x 3/8 5.20
S15-260043 3/8 0.710 20 2250 3/8 x 3/8 4.90
S12-260043 3/8 0.710 25 2250 3/8 x 3/8 6.00
S16-260043 3/8 0.710 30 2250 3/8 x 3/8 7.10
S44-260043 3/8 0.710 35 2250 3/8 x 3/8 8.00
S46-260043 3/8 0.710 50 2250 3/8 x 3/8 10.20
S3-260043 3/8 0.710 30 2250 3/8 x 1/2 11.70
S4-260043 3/8 0.710 40 2250 3/8 x 1/2 9.60
S5-260043 3/8 0.710 50 2250 3/8 x 1/2 10.40
S40-260043 1/2 0.850 16 3250 1/2 x 1/2 7.40
S21-260043 1/2 0.850 25 3250 1/2 x 1/2 8.40
S6-260043 1/2 0.850 30 3250 1/2 x 1/2 8.90
S37-260043 1/2 0.850 35 3250 1/2 x 1/2 9.00
S22-260043 1/2 0.850 40 3250 3/8 x 1/2 22.00
S7-260043 1/2 0.850 40 3250 1/2 x 1/2 11.70
S8-260043 1/2 0.850 50 3250 1/2 x 1/2 14.10
S24-260043 1/2 0.850 75 3250 1/2 x 1/2 22.00
S26-260043 3/4 1.120 30 1250 3/4 x 3/4 13.00
S27-260043 3/4 1.120 50 1250 3/4 x 3/4 22.20
S28-260043 3/4 1.120 75 1250 3/4 x 3/4 30.00
High Pressure Chassis grease - 100 R2T 2 wire braid. Max temp 210 °F (99 °C)
S6-260044 1/4 0.580 20 5000 1/4 x 1/4 5.20
S10-260044 1/4 0.580 25 5000 1/4 x 1/4 6.40
S7-260044 1/4 0.580 30 5000 1/4 x 1/4 7.70
S20-260044 1/4 0.580 35 5000 1/4 x 1/4 9.00
S8-260044 1/4 0.580 40 5000 1/4 x 3/8 10.20
S9-260044 1/4 0.580 50 5000 1/4 x 3/8 12.70
S13-260044 3/8 0.730 25 4800 1/4 x 1/4 9.70
S25-260044 3/8 0.730 25 4800 3/8 x 3/8 9.70
S3-260044 3/8 0.730 30 4800 1/4 x 3/8 10.72
S24-260044 3/8 0.730 35 4800 3/8 x 3/8 12.40
S26-260044 3/8 0.730 35 4800 3/8 x 1/2 12.40
S4-260044 3/8 0.730 40 4800 1/4 x 3/8 15.40
S5-260044 3/8 0.730 50 4800 1/4 x 3/8 19.20
S27-260044 3/8 0.730 50 4800 3/8 x 3/8 20.70
S19-260044 3/8 0.730 50 4800 3/8 x 1/2 20.90
S23-260044 3/8 0.730 75 4800 3/8 x 3/8 25.00
S18-260044 3/8 0.730 75 4800 3/8 x 1/2 26.60
S22-260044 3/8 0.730 100 4800 3/8 x 3/8 33.00
Caution: Be sure working pressure required does not exceed above ratings. Misapplication can result in serious operator injury.
Note: Advise product to be handled, maximum temperature and pressure fitting size or sizes when ordering.